HomeSponsorsTeam MembersBikeShedule & ResultsPhoto Gallerytechnical InfoLinks

For Sale
1999 Honda RS250 1 race on complete Kevin Murray motor rebuild (properly broken-in). Freshly rebuilt suspension set up for 190 lb. rider. Penske four way adjustable shock with titanium spring. HARC pipes and silencers, Carbon-tech reeds. Brembo radial master cylinder. Heads modified by MCE for leaded fuel. Battle rearsets. Needs nothing - ready to race!

Scroll down for complete listing of spares.

Asking $7000 for bike with basic spares (jetting and gearing) or $9,500 for bike with complete spares (see below)

Contact me at or 617-596-2517

Please note that bike will come with stock Brembo front calipers NOT the billet ones shown in the photos. Det counter and Data logger are also not included.

Click any photo to see a larger image

Left Side Front View Right Side
Rear View Cockpit Air Box
Penske Clutch Electronics
R. Ready to Race L. Side

Spares Scroll down for photos...

1 set stock wheels
2 complete sets of bodywork including seats (used but no crash damage - one silver/red and one blue) NOT pictured
1 complete top end (new)
2 complete sets of clutch plates (new)
1 set clutch springs (new) 1 set cylinders (appear absolutely new - but came in non-HRC box)
Battle Shifter (new - not installed)
1 stock wiring harness (new)
1 set heads w/det. rings - good condition (measured vol. 12.2cc)
1 head w/o det ring good condition (unknown volume)
HRC Manual and parts book (English)
HRC Pin spanner to adjust chain slack
1 set VHM extended rearset hangers (new)
Throttle and clutch cables (new and used)
Assorted gaskets, O-rings, assembly shims, reeds etc. (new)
Spark plugs and plug caps (new)
Assorted Ft. Brake pads (new)
1 set stock pipes (good condition)
1 Ft. Brake lever (new)
1 Clutch lever (used)
3 cylinders (used)
2 stock silencers (some dents but very usable)
2 stock shocks (used)
1 stock swingarm (used - good condition)
1 stock subframe (used - straight)
Stock rear brake master and caliper (used)
Assortment of shock and fork springs
1 Throttle assembly (used)
Carb boots and reed cages for #1 and #2 cylinders (good condition)
Assorted radiator hoses (some new - some used good condition)
Assorted hand and foot controls (rough but usable) NOT Pictured
Good assortment of jets and external gearing
Front and rear stands

Click any photo to see a larger image

Spare Wheels Spares Battle Shifter
12.2cc heads Combusiton Chambers of heads shown to left Spare pipes and swingarm
Cylinders - New and Used Closeup of cylinders on right of prev. photo Subframe, manual, pin-spanner
  Brake components in this photo will come installed